Installation Process Of Myfi

Open a web Browser & browse IP address as 192.168.0.254 . Then the following window will appear

If above page does not appear check:
Wire connectivity
LAN configuration
All four LEDs are blinking
Make sure the default password (admin) is changed by the user or not .

Click on “Change adapter settings” or Local Area Connection

Make sure all other Local Area Connection are disables and Right Click on desired Local Area Connection , Then select ” Properties ”

Select ” Internet Protocol Version 4 ” then select ” Properties” .

Check Obtain an IP and DNS server automatically are selected .

Installation Process :

Give user id: system & password: system for Authentication .

Note: user id: system & password: system gives access in admin mode. We need access to admin mode for “Authentication”

After login version information page will appear, Click on WiMAX for Authentication

click ” Setting ”

PKM: Enable
EAP Type: EAP-TTLS-MSCHAPV2
Inner NAI ID: QUBEE Username
Inner NAI password: User password
Outer NAI: modemMAC@qubee.com.bd
Then click on “Save”

Note: if customer does not use Outer NAI then customer will face authentication problem